This is a complete set of aftermarket spindle nuts and washers for a Dana 60 front axle. It consists of 2 each inner nut with pin, locking washer, and outer nut with the pin. These were commonly found on GM, Ford, and Dodge applications. They were also used on Dana 50 applications in Ford applications. They are 2″ 16 threads per inch. This kit is also the same as Warn 33271 nut kit used to put lockouts on a Ford truck with factory automatic hubs.
![](https://cmgearworks.com/wp-content/uploads/2018/07/IMG_20230725_163443760-scaled.jpg)
![](https://cmgearworks.com/wp-content/uploads/2018/07/IMG_20230725_163451706-scaled.jpg)
![](https://cmgearworks.com/wp-content/uploads/2018/07/IMG_20230725_163443760-247x198.jpg)
![](https://cmgearworks.com/wp-content/uploads/2018/07/IMG_20230725_163451706-247x198.jpg)
Dana 60 Spindle Nut Kit Chevy Ford GMC Dodge Dana 50 Ford 4 Nuts 2 Washer 4X4
$40.00
- SKU: 33271
- Brand: RAJ International Trading
- Weight: .90
- Shipping: Calculated at checkout
- Axles & Axle Bearings
- Balljoints
- Bearing Kits
- Cases & Spiders
- Differential Covers
- Dropouts & Pinion Supports
- Free Spin Kit
- Individual Bearings
- Miscellaneous
- Oils & Additives
- Ring & Pinion Sets
- Small Parts & Seals
- Spindles
- Traction Devices
- Transfer Case Parts
- Transmission Parts
- Uncategorized
- Universal Joints
- Used Parts
- Yokes
- Description
- Additional information
- Reviews (0)
- Vehicle Fitment
Weight | .90 lbs |
---|---|
Dimensions | 6 × 4 × 2 in |
Be the first to review “Dana 60 Spindle Nut Kit Chevy Ford GMC Dodge Dana 50 Ford 4 Nuts 2 Washer 4X4”
You must be logged in to post a review.
Make | Model | Year |
---|---|---|
Ford | F350 | 1973 - 1974 |
Ford | F350 | 1975 - 1976 |
Ford | F350 | 1977 - 1978 |
Ford | F350 | 1979 - 1980 |
Ford | F350 | 1981 - 1982 |
Ford | F350 | 1983 - 1984 |
Ford | F350 | 1985 - 1986 |
Ford | F350 | 1987 - 1988 |
Ford | F350 | 1989 - 1990 |
Ford | F350 | 1991 - 1992 |
Ford | F350 | 1993 - 1994 |
Ford | F350 | 1995 - 1996 |
Ford | F350 | 1997 - 1998 |
GM/Chevy | K30 | 1970 - 1971 |
GM/Chevy | K30 | 1972 - 1973 |
GM/Chevy | K30 | 1974 - 1975 |
GM/Chevy | K30 | 1976 - 1977 |
GM/Chevy | K30 | 1978 - 1979 |
GM/Chevy | K30 | 1980 - 1981 |
GM/Chevy | K30 | 1982 - 1983 |
GM/Chevy | K30 | 1984 - 1985 |
GM/Chevy | K30 | 1986 - 1987 |
GM/Chevy | K30 | 1988 - 1989 |
GM/Chevy | K30 | 1990 - 1991 |
Related products
![Dana 60 King Pin 4 Bolt Upper Nylon Bushing GM Chevy Ford Dodge 4X4 Front Axle](https://cmgearworks.com/wp-content/uploads/images/products/products-DSCN7016__99528.1528765737.1280.1280-247x198.jpg)
Miscellaneous
Dana 60 King Pin 4 Bolt Upper Nylon Bushing GM Chevy Ford Dodge 4X4 Front Axle
This is the upper nylon bushing in a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to mid 1990’s.
View Details![](https://cmgearworks.com/wp-content/uploads/2021/01/IMG_20210125_122405454-247x198.jpg)
Miscellaneous
1973-1992 GM Dana 44 or Corporate 10 Bolt 4X4 Front Axle Spindle Bearing & Seal kit 1976-1986 Jeep 30 Ford Dodge
This is a genuine Dana/Spicer spindle bearing and seal kit for the Dana 30 or 44 4X4 front axle found in many common domestic applications, including 1973-1992 1/2 ton GM trucks, 1976-1976 Jeep vehicles, and Dodge and Ford open knuckle front ends. This kit includes the support bearing, large and small V seals, and the [...]
View Details![](https://cmgearworks.com/wp-content/uploads/2020/07/IMG_20200730_111244515-247x198.jpg)
Small Parts & Seals
DANA 44 SPINDLE BEARING & SEAL KIT BRONCO F150 1993-1996 FORD 4X4 FRONT AXLE
Dana 44聽 IFS BRONCO AND F150聽 1993-1996 Spindle Bearing and Seal Kit Includes 1 each Spindle Bearing (550759 or SCE2110) and V Seal, Wiper Seal (50492), and Thrust Washer (45651) as pictured.
View Details![Dana 60 King Pin 4 Bolt Upper Cap Cover GM Chevy Ford Dodge 4X4 Front Axle](https://cmgearworks.com/wp-content/uploads/images/products/products-DSCN7023__34957.1528745675.1280.1280-247x198.jpg)
Miscellaneous
Dana 60 King Pin 4 Bolt Upper Cap Cover GM Chevy Ford Dodge 4X4 Front Axle
This is a 4 bolt cap that goes over the spring and bushing in a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the early 1990’s.聽
View Details![](https://cmgearworks.com/wp-content/uploads/2018/10/DSCN7281-247x198.jpg)
Axles & Axle Bearings
DANA 60 FRONT 35 SPLINE CHROMOLY DRIVE FLANGES 4X4 Front Axle Chevy Ford Dodge
This is a genuine Dana/Spicer drive flange kit for a Dana 60 4X4 front axle with 35 spline outer axles. Most factory outer axles were 30 spline. These fit GM, Ford, and Dodge applications with 55 internal splines in the hubs.
View Details![Dana 44 4X4 Front Spindle 1973-1976 K10 K20 Blazer GM Chevy Small Bearing](https://cmgearworks.com/wp-content/uploads/images/products/products-DSCN7125__42248.1531251218.1280.1280-247x198.jpg)
Spindles
Dana 44 4X4 Front Spindle 1973-1976 K10 K20 Blazer GM Chevy Small Bearing
This is a genuine Dana Spicer spindle for the Dana 44 4X4 front axle in 1/2 and 3/4 ton trucks, Blazers, and Suburbans from 1973-1976. This is the same as part number 706528X, but it is much cheaper. This also comes with the dust seals, inner bearing, and plastic thrust washer.
View Details![Dana 60 4X4 Front Spindle 1977-1991 GM Chevy K30 1975-1998 Dodge Ram 2500 3500](https://cmgearworks.com/wp-content/uploads/images/products/products-DSCN7117__65767.1531244822.1280.1280-247x198.jpg)
Spindles
Dana 60 4X4 Front Spindle 1977-1991 GM Chevy K30 1975-1998 Dodge Ram 2500 3500
This is a genuine Dana/Spicer 4X4 front spindle that fits 1977-1991 GM K30 1 ton trucks and 1975-1998 Dodge Ram 2500 and 3500 series trucks with the Dana 60 front axle. This is the same as part number 700013, but is much cheaper. This comes with the inner bearing, 2 dust seals, and the axle [...]
View Details![Dana 60 King Pin 4 Bolt Upper Cap Cover Gasket GM Chevy Ford Dodge 4X4 Front Axle](https://cmgearworks.com/wp-content/uploads/images/products/products-DSCN7015__12305.1528765741.1280.1280-247x198.jpg)
Miscellaneous
Dana 60 King Pin 4 Bolt Upper Cap Cover Gasket GM Chevy Ford Dodge 4X4 Front Axle
This is the gasket for the 4 bolt cap that goes over the spring and bushing in a Dana 60 4X4 front axle with the king pin setup. These were commonly found in GM, Ford, and Dodge applications from the early 1970’s to the mid 1990’s.
View Details
Reviews
There are no reviews yet.