简介
This guide details the steps involved with replacing the keypad or faceplate on the Motorola C139
你所需要的
-
步骤 1 Battery
-
Begin by flipping your phone over so that the back cover is facing up.
-
Apply force to the back cover and simultaneously slide the cover down.
-
-
步骤 2
-
Press the button labeled "PUSH" located at the bottom back of the phone. This will release the battery.
-
Lift and remove the battery.
-
-
-
步骤 4
-
Slide a pry tool underneath the adhesive rubber stip and peel it back away from the phone.
-
Repeat for the other side.
-
-
步骤 5
-
Insert the pry tool in the slit on the side of the phone and slide it down until you hear an audible click and the phone bottom loosens from the top.
-
Use the pry tool to release the two hooks on each side and the two hooks at the top holding the case together.
-
-
步骤 7
-
Use plastic opening tools to free the circuit board from the case.
-
Then grip the circuit board and lift to remove the circuit board from the case.
-
-
步骤 8 Keypad & Faceplate
-
On the top half of the phone push downwards on the number keys to free the keypad from the top of the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
取消：我没有完成这个指南。
徽章: 10
+ 7更多徽章
团队
Clemson, Team 2-2, Benson Spring 2012 Clemson, Team 2-2, Benson Spring 2012 的会员
CLEM-BENSON-S12S2G2
3 名成员
创作了15篇指南
