Gear Flowmeters for Chemical Injection (ZHM-MK)
- Measuring range:
0.002 to 75 l/m - Viscosity:
0.8…30 mm²/s - Linearity:
±1.5 % of actual flow (viscosity ≥ 5 mm²/s , ±2.5 % of actual flow (viscosity ≥ 5 mm²/s for ZHM 01/3) - Pressure:
max. 420 bar
The ZHM MK gear flow meter (ball bearing design) are flow meters which are mainly used in lubrication and low-viscous liquids. Therefore they are used especially for the fuel consumption measurement and the dosing of low viscous media. Only high-grade steels that even withstand corrosive liquids are used in the production of gear flow meters.
Combined with the use of high-quality precision ball bearings, the ZHM MK guarantees optimum measurement accuracy and a long service life under even the toughest application conditions. The ball bearing facilitates a very low starting torque of the measuring element. This way even the lowest flow rates can be accurately measured.
| General Specification | |
|---|---|
| Measuring ranges |
0.002…75 ltr./min |
| Viscosity range |
0.8…30 mm²/s |
| Linearity |
±1.5 % of actual flow (viscosity ≥ 5 mm²/s ±2.5 % of actual flow (viscosity ≥ 5 mm²/s for ZHM 01/3) |
| Pressure | 420 Bar |
| Repeatability | ±0.05 % |
| Accuracy | ±0.1 % |
| Material | |
|---|---|
| Housing |
as per DIN 1.4305 [AISI 303], 1.4404 [AISI 316L] |
| Gears | as per DIN 1.4122 |
| Ball Bearings | Stainless steel ball bearing |
| Sealing: | FKM, PTFE (others on request) |
| Medium temperature | -40 °C up to +180 °C [-40 °F up to +356 °F] |
| datasheet_20zhm_mk.pdf |
| user_20manual_20zhm_mk.pdf |
Especially suitable for diesel and fuel consumption
Additive Injection
Leakage-Measuring
Odorization
Laboratory and test bench applications